As an Amazon Associate I earn from qualifying purchases.

1. Qualihome

#ad

Ideal For Dryer and Plastic Vent Ducts, Adjustable 3-4 1/2” Diameter, Easy Turn Thumb Screw Metal Clamp, 2 Pack Easy Turn Clamp

#ad
Qualihome #ad - Thumb screw makes rotating easier, no need for a screwdriver. Easy to tighten, No tools Needed. Ease and quick installation. Stainless steel band and housing. Ideal for attaching clothes dryer duct.
More information #ad
BrandQualihome #ad
ManufacturerQualihome #ad
Weight0.15 Pounds
Part NumberQHVC
More information #ad

2. GLIDESTORE

#ad

GLIDESTORE 4-Inch Hose Clamps Stainless Steel Adjustable 3 1/2-4 3/8” Diameter, 5-Pack Easy Turn Clamp, Easy Turn Thumb Screw Metal Clamp, Ideal for Dryer and Plastic Vent Ducts

#ad
GLIDESTORE #ad - If you are dissatisfied with 4 hose clamp, drop us a message and we are certain to give you a full refund. High-end material: hose clamps stainless steel made of 201 stainless steel, constructed to resist scaling and corrosion and ensure long- term use.

This hose clamps can be applied for dryer, plastic vent ducts, cable, boat, tube, automotive, fuel lines in domestic applications, securing hose, pipe, industrial and so on. Amazing function: these hose clamps are used to lock the hose tightly with a view to preventing flow leakage.
More information #ad
Huge quantily, small cost: each package consists of 5 pack 4 inch hose clamps, the size of each clamp is about 4 inch Adjustable 3 1/2 - 4 3/8” Diameter. 100% money back guarantee: customer satisfaction is our utmost priority. Easy to use: can be simply loosened or tightened by using the adjustable handle without any other tools.
BrandGLIDESTORE #ad
ManufacturerGLIDESTORE #ad
Part Number1000
More information #ad

3. Tech Team

#ad

Stainless Steel, 4”, Dust Collection Hose Clamp, Key-Style, Hose Clamps, Pack of 6, Clothes Dryer Vent Hose Clamp, ½” Wide, Tech Team Band-Style Clamps

#ad
Tech Team #ad - 4” key tensioner-style stainless steel band for 4-inch dust collection hoses and 4” inch dryer vent hoses. Pack of 6. The oversized 100% steel tightening key is superior to color plastic keys that can break under stress and the heat typical of clothes dryer vent applications.
More information #ad
Half-inch wide #304 stainless-steel band fits hoses from 3 ½” diameter up to 4 ½” dust collection hoses and clothes dryer vent hoses. Key-style screw mechanism allows for one hand tightening of clothes dryer vent hoses in confined spaces for a leak-proof seal.
BrandTech Team #ad
ManufacturerTECH TEAM PRODUCTS, INC. #ad
Weight0.49 Pounds
Part NumberHAB-64
More information #ad

4. Dryer Dock

#ad

Dryer Dock The Original Dryer Vent Quick Release, Two-Piece Dryer Hose Quick-Connect, Twist & Lock Tight, Fits 4 Inch Tubes

#ad
Dryer Dock #ad - Proudly made in the USA. Dryerdock quick-connect - it is the easiest way to connect your dryer's vent to your house vent. Easy maintenance - dryer dock is a two-piece “quick release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning.

Prevents fires - according to the national fire protection association, dryer vent fires are the number one cause of household fires, 000 home dryer fires are reported each year, nearly 17, causing around 51 deaths, 380 injuries, and $236 million in property loss.
More information #ad
Fits 4" tubes with a 6" flange. This unique solution is easy to install, looks great when installed, saves space behind the dryer, and makes maintenance a snap. Keeping the vent clean, saves energy, and prevents dryer fires.

Dryer dock is the “gold standard” of quick release in the industry for home and commercial applications, and offices. The original dryer dock - patented under usp # 6, it is installed in more than 500, factories, 131, 000 homes, 958. Eliminates environmental intrusion - made of rigid abS plastic and fastens together with a slight twist, eliminates air drafts, the rigid design keeps the hose securely in place, pest intrusion, saves energy, wear and tear on both dryer and clothes.
BrandDryer Dock #ad
ManufacturerVentpro Inc #ad
Height6 Inches
Length3 Inches
Weight0.3 Pounds
Width6 Inches
Part Number5000-1
Model5000-1
More information #ad

5. Deflecto

#ad

Deflecto Easy Connecting Dryer Vent Hook Up Kit, 4" x 8' HUPK8WA/4, Flexible Semi-Rigid Aluminum Duct

#ad
Deflecto #ad - Easy connecting dryer vent hook up kit includes 2 Hooker-Upper protectors, 1 semi-rigid aluminum 8’ long duct and 1 gasket. Jaw capacity - 1.

25 inch 3. 2 cm. Hooker-upper also protects the duct from being smashed behind dryer, which helps prevent unsafe dryer operation and longer drying times. Duct twists into hooker-upper protectors and slides over dryer vent and outlet pipe; No clamps, tools or tape necessary.
More information #ad
4. Handle Length - 7. 281 inch 18. 5 cm. Kit contains 8’ long aluminum semi-rigid, flexible duct that allows quick, easy installation. Gasket included may be needed for a proper fit on some dryers. Maximum compatible pipe size in.
BrandDeflecto #ad
ManufacturerDeflecto #ad
Height4.25 Inches
Length8 Inches
Weight1.1 Pounds
Width4.25 Inches
Part NumberHUPK8WA/4
ModelHUPK8WA/4
WarrantyAS LISTED
More information #ad

6. ZIGGURAT PRODUCTS

#ad

By Ziggurat Products, STV-90 Dryer Duct Connector, DIY Easy Dryer Vent Hookup Kit

#ad
ZIGGURAT PRODUCTS #ad - Simply slide it on and push your dryer back. This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.

Your stv-90 is sure to last longer than any other duct clamp out there! Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes.
More information #ad
You don’t need to go searching for the right sized clamp anymore--we’ve got you covered! Effortless and durable: our sturdy elbow connector makes set up simple and a one-time project.

No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight.
BrandZIGGURAT PRODUCTS #ad
ManufacturerDesign-Tek #ad
Height5.5 Inches
Length6.25 Inches
Weight0.5 Pounds
Width4.5 Inches
Part NumberSTV-90
ModelSTV-90
More information #ad

7. Cambridge Resources

#ad

Zinc Plated Steel, 2 Pk, Cambridge Tension Clamps

#ad
Cambridge Resources #ad - Premium plated zinc plated steel. Rugged design 4 inch non-rigid flexible duct. Cambridge performance driven and high quality products are preferred by industry leaders. Cambridge tension clamps 2 pieces. Convenient 2 piece packaging.
More information #ad
BrandCambridge Resources #ad
ManufacturerCambridge Resources #ad
Height4.5 Inches
Length5 Inches
Width4.75 Inches
Part NumberSC-4-PK
More information #ad

8. Kelaro

#ad

Flexible Clothes Dryer Duct, 10 Foot by 4 Inch | Includes 2 Premium Screw Clamps

#ad
Kelaro #ad - Easy to install for contractors or homeowners. Universally compatible with dryers from whirlpool, Amana, Samsung, Bosch, LG, electrolux, Maytag, Kenmore, GE, Speed Queen and more.

Fire resistant dryer duct - forms a tight seal to direct fumes and humidity safely away from living spaces. Kit includes: two premium 4 inch worm hose clamps for a secure connection to wall and rear of dryer.
More information #ad
Multi-ply aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix - constructed to replace inferior vinyl ducts. Upgraded clamps ensure a superior dryer vent hose connection that won't fail. 4" x 10' flexible aluminum duct Compatible with front-load and top-load dryers. Suitable for gas dryer or electric dryer applications.
BrandKelaro #ad
ManufacturerKelaro #ad
Height8 Inches
Length4.5 Inches
Weight0.89 Pounds
Width4.5 Inches
Part NumberKFDV10
More information #ad

9. ZIGGURAT PRODUCTS

#ad

DIY Easy Dryer Vent Hookup Kit, STV-M Dryer Duct Connector, by Ziggurat Products

#ad
ZIGGURAT PRODUCTS #ad - Built to last – our stv-m snap to vent kit is designed to last a long time. This complete kit installs easily and works efficiently. Quick and easy installation – the use of this dryer hose vent snap on kit is so easy and it requires no tools. We rely on quality to sell our products.

Ziggurat’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other possible damage to the connection. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp.
More information #ad
Attach it to the dryer and the wall and it’s all set for use. With strong, yet flexible materials we have found the perfect way to create a clothes dryer connector that will get the job done for many years to come. Tight attachment– this plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer.

The simplicity of this snap on hose kit is that it allows you to begin using the dryer right away. These products are the best choice for simplicity and durability. We create household accessories that make life easier for our valued customers. Products made in the usa – the ziggurat products were envisioned by a father and son who cared about safety and value. Just pre-assemble the 90 elbow, 4" hose, and straight piece.
BrandZIGGURAT PRODUCTS #ad
ManufacturerZIGGURAT #ad
Height5 Inches
Length8 Inches
Weight1 Pounds
Width4 Inches
Part NumberSTV-M
ModelSTV-M
More information #ad