Top 8 Plumbing Quick Connect Fittings – Dishwasher Replacement Hoses

As an Amazon Associate I earn from qualifying purchases.

1. Air Gap International

#ad

DLA-D, D-25QC, Drain Line Adapter DLA With 1/4-inch Quick Connect Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher ET116-001

#ad
Air Gap International #ad - Quiet operation: the et116-001 is designed to eliminate most reject water noise. It is upc uniform plumbing code listed, IPC International Plumbing Code, and NSF National Sanitation Foundation tested. A hose coupler and clamps are provided for a secure connection to the garbage disposal inlet.

Certification: the et116-001 is legal to install in any state. The testing is conducted for every manufactured lot to ensure consistent performance. The et116-001 installation enables plumbing pipes to stay intact. It is also equipped with a self-cleaning port. Drain line connection: the et116-001 enables the connection of the RO water filter to a garbage disposal with a dishwasher. Simple installation: the et116-001 is designed for connecting dishwasher and reverse osmosis ro filter to a garbage disposal line.

Its dishwasher connector accommodates various inside diameter ID dishwasher hoses 1/2, 5/8, 3/4, or 7/8-inch. Its reverse osmosis 1/4-inch push-in connector fits 1/4-inch RO poly tubing. These certifications assure that ET116-001 is safe to use. Installing the et116-001 is simple and allows bypassing the existing plumbing but with no pipes to undo.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET116-001
ModelET116-001

2. PureWater Filters

#ad

K150, K2500, B155, Fitting for Direct Water Line Hookup with Elbow for Keurig Commercial Brewers B150, K155

#ad
PureWater Filters #ad - Hooks your commercial brewer b150p, k155p, k2500 plumb kit to a 1/4" water line, K150P, B155P, also compatible with the new K2500 model. Lifetime Warranty and telephone support. Purewater filters is not affiliated with Keurig Green Mountain, Inc. 1/4 " tube x 3/4" female Garden Hose Thread, Includes washer. Commercial brewer b150, k2500 water connector with black 90 degree elbow will work only if mechanical water tank plumbkit is installed, B155, K150, K155, works with P models. Keurig is a registered trademark of Keurig Green Mountain, Inc.
BrandPureWater Filters #ad
ManufacturerPureWater Filters #ad
Height2 Inches
Length3.5 Inches
Weight0.04 Pounds
Width2 Inches
Part NumberCFD2575-E
Model8541955111

3. Waterdrop

#ad

Chlorine, Reduces Lead, Bad Taste & Odor, NSF Certified High Capacity Drinking Water Filtration System with Direct Connect Fittings, Waterdrop Inline Ice Maker and Refrigerator Filter

#ad
Waterdrop #ad - The filtration process results in water that doesn’t have any unpleasant odors or aftertaste. Selected filter mediawaterdrop inline filter adopts premium coconut shell activated carbon block whose filtration accuracy is only 05 μm. You won’t need frequent filter replacements with our product.

At the same time, ice makers, it is compatible with water coolers, and even RVs. It can effectively reduce lead, and other contąminants in water, Rust, Colloids, Fluoride, providing you with healthier and safer water from your refrigerator dispenser. Easy installationwe provide 1/4” compression and push-to-connect fittings for plastic or copper water line. It is also nsf 372 certified for lead-free material. It is a replacement for most refrigerator filter brands. Certified filtration performancethis filter is nsf 42 certified for the reduction of 98% of chlorine, taste and odor.

It has an impressive lifespan of 1, 400 gallons. Please insert the pe tube into the filter cartridge for 20mm, which can prevent water leakage effectively. Replacement modelsthis filter is a smart choice to replace your traditional refrigerator filter. Remarkable valuemakes the most of every cent with our inline filter. Follow the directions closely and you will have the filter up and processing water in 5 minutes, with no wasted time or effort.
BrandWaterdrop #ad
Part NumberWD-INL-S

4. Air Gap International

#ad

D-38QC, Drain Line Adapter DLA With 3/8-inch Quick Connect Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher ET116-002, DLA-D

#ad
Air Gap International #ad - Installing the et116-002 is simple and allows bypassing the existing plumbing but with no pipes to undo. Drain line connection: the et116-002 enables the connection of the RO water filter to a garbage disposal with a dishwasher. It is upc uniform plumbing code listed, IPC International Plumbing Code, and NSF National Sanitation Foundation tested.

Simple installation: the et116-002 is designed for connecting dishwasher and reverse osmosis ro filter to a garbage disposal line. These certifications assure that ET116-002 is safe to use. Quiet operation: the et116-002 is designed to eliminate most reject water noise. Its reverse osmosis 3/8-inch push-in connector fits 3/8-inch RO poly tubing. The et116-002 installation enables plumbing pipes to stay intact.

Its dishwasher connector accommodates various inside diameter ID dishwasher hoses 1/2, 3/4, 5/8, or 7/8-inch. It is also equipped with a self-cleaning port. A hose coupler and clamps are provided for a secure connection to the garbage disposal inlet. Certification: the et116-002 is legal to install in any state. The testing is conducted for every manufactured lot to ensure consistent performance.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET116-002
ModelET116-002

5. Highcraft

#ad

Highcraft CNCT2665-OM Line, Braided Stainless Steel, Ice Maker hose With 1/4" Fittings On Both Ends, Connects Water Supply, 5 Ft

#ad
Highcraft #ad - Universal fit: ice maker connector has 1/4 Brass chrome fitting on both ends and is compatible with most icemakers. To deliver you fresh, clean, delicious Water Minus The Despised '"Plastic Taste" or '"Rubbery Smell".

Tight seal: ensures no water leakage When Connecting To Your Fridge Supply Hose. Easy installation: ice maker hose Is Quick And Easy To Install To Your Refrigerator Water Line. Burst proof: water supply lines is made of high Tensile Strength Braided Stainless Steel Protects PVC Inner Tube For maximum Pressure And Performance. High quality: our ice maker water line was manufactured with superior Quality Stainless Steel And Guaranteed.
BrandHighcraft #ad
ManufacturerHighcraft #ad
Height1.1 Inches
Length60 Inches
Width1.1 Inches
Part NumberCNCT2665-OM
ModelCNCT2665-OM

6. Air Gap International

#ad

DLA-D, D-50QC, Drain Line Adapter DLA With 1/2-inch Quick Connect Fitting for a Water Filter and 7/8-inch Fitting for a Dishwasher ET116-003

#ad
Air Gap International #ad - Quiet operation: the et116-003 is designed to eliminate most reject water noise. The et116-003 installation enables plumbing pipes to stay intact. Simple installation: the et116-003 is designed for connecting dishwasher and reverse osmosis ro filter to a garbage disposal line.

It is upc uniform plumbing code listed, IPC International Plumbing Code, and NSF National Sanitation Foundation tested. Certification: the et116-003 is legal to install in any state. These certifications assure that ET116-003 is safe to use. Drain line connection: the et116-003 enables the connection of the RO water filter to a garbage disposal with a dishwasher. It is also equipped with a self-cleaning port. Its dishwasher connector accommodates various inside diameter ID dishwasher hoses 1/2, 5/8, 3/4, or 7/8-inch.

Installing the et116-003 is simple and allows bypassing the existing plumbing but with no pipes to undo. Its reverse osmosis 1/2-inch push-in connector fits 1/2-inch RO poly tubing. The testing is conducted for every manufactured lot to ensure consistent performance. A hose coupler and clamps are provided for a secure connection to the garbage disposal inlet.
BrandAir Gap International #ad
ManufacturerAIR GAP INTERNATIONAL #ad
Part NumberET116-003
ModelET116-003

7. SharkBite

#ad

3/4", SharkBite 24438 Brass Push-to-Connect Tee with Water Pressure Gauge

#ad
SharkBite #ad - Durable dezincification resistant brass construction. Use to connect copper, pex and cts cpvc pipes in any combination. Certified to 200 psi and 200 degree. Gauges can be installed as a reusable or permanent device.
BrandSharkBite #ad
ManufacturerYour Other Warehouse #ad
Height5.24 Inches
Length3.25 Inches
Weight0.58 Pounds
Width2 Inches
Part Number634210
Model634210

8. SharkBite

#ad

3/4 Inch x 3/4 Inch FIP, SharkBite U3088FLEX18BVLFA Flexible Water Heater Connector with Ball Valve, Push-to-Connect Braided Stainless Steel, Water Heater Hose

#ad
SharkBite #ad - Use in potable water and hydronic heating applications. Just push to create a watertight seal. Performance: rated to 200 psi and 200 Degrees F.

Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Versatilty: sharkbite connects copper, CPVC, PEX, and PE-RT Pipe in any combination. Installs in seconds: flexible Water Hose requires no special tools, no soldering, or glue. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height5 Inches
Length19.25 Inches
Weight0.68 Pounds
Width7.25 Inches
Part NumberU3088FLEX18BVLF
ModelU3088FLEX18BVLF
WarrantyLimited 25 Year